top of page
Boat Waxing & Detailing
All waxing services include a minimum of two coats.
1) A VGR compound is used to eliminate scratches and swirls while restoring color with a buffer.
2) An Ocean Polymer is applied by hand as a finishing coat to enhance shine and provide a protective layer against water stains. Please note that waxing rates do not cover washing or any additional cleaning required to perform the waxing services.
We offer a variety of waxing and detailing services.
-
Under the Rail
-
Over the rail
-
Inside the cab
-
Full top to bottom
-
Inside cleaning and vacuuming
-
Bottom Painting
Under the Rail
Under the rail includes only below the bump rail on the vessel.
Before
After
Over the Rail
Includes above the bump rail including the side rail, sides of the cab, bow and even the roof if applicable. (smooth wax able surface). This also includes the radar dome if the vessel is equipped with one.
Example
Top to Bottom & Cleaning
Waxed top to bottom, under the rail, over the rail, inside the rails. The boat in this example also had a full pressure washing inside and out.
Before
After
Bottom Painting
Cover coats for bottom painting involve painting the bottom of your fiberglass vessel with a single coat to keep it sealed and protected. For a full prime restart and sanding, there is much more involved including taking all old bottom paint off and sandblasting down to base fiberglass, then priming and painting. Typically this doesn't have to be done until there are 5 or more coats of paint on or if the paint is entirely ruined during the season.
Example
bottom of page